Product ID:MC-BOND II ACRYLIC CEMENT, 16752
MSDS Date:05/16/1991
FSC:8040
NIIN:00N057881
MSDS Number: BWYYQ

POLYSCIENCES INC

400 VALLEY ROAD
WARRINGTON, PA 18976
US

Emergency Phone: 215-343-6484

Info Phone: 215-343-6484

Cage: 9C365

POLYSCIENCES INC

WARRINGTON, PA 18976 US

Telephone: 215-313-6484

Cage: 9C365

CHLORINATED HYDROCARBON

Fraction By Weight: <80%

OSHA PEL 500 PPM (MFR)

ACGIH TLV: 1000 PPM (MFR)

ORGANIC ACID (TYPE NOT SPECIFIED)

OSHA PEL 10PPM; 25MG/M3

ACGIH TLV: N/K

ACRYLIC MONOMER

Fraction By Weight: <20%

OSHA PEL 100PPM; 410MG/M3

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITANT. CHRONIC: IRRITANT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SKIN, EYES, AND RESPIRATORY IRRITATION. VAPORS
IN HIGH CONCENTRATIONS MAY CAUSE HEADACHE, NARCOSIS,
UNCONSCIOUSNESS AND IN EXTREME CASES, DEATH.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: WASH AFFECTED AREA WITH COPIOUS AMOUNTS OF WATER. EYES:
FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SEE PHYSICIAN. INHAL:
REMOVE TO FRESH AIR. GIVE OXYGEN OR ARTIFICIAL RESPIRATION, AS
NEEDED. ING EST: DRINK 1 OR 2 GLASSES OF WATER. CALL PHYSICIAN.
SEEK MEDICAL TREATMENT IF DISCOMFORT PERSISTS.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL POWDER, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:FIRE-HEATED CONTRS MAY RUPTURE DUE TO
RAPID POLYMERIZATION OF MATL. COOL CONTRS W/WATER STREAM. VAPORS
HVR/AIR & MAY TRAVEL TO IGNITION SOURCE & FLASHBACK.

Spill Release Procedures:ABSORB ON INERT MATERIAL. WASH AND VENTILATE
SPILL SITE AFTER PICKUP IS COMPLETE. WEAR NIOSH/MSHA SCBA, RUBBER
BOOTS, GLOVES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE MATERIAL IN COOL DRY PLACE. KEEP
STORAGE CONTAINER TIGHTLY CLOSED. AVOID PROLONGED OR FREQUENT
EXPOSURE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR IF NEEDED.
Ventilation:LOCAL EXHAUST. EXPLOSION PROOF AT POINT OF OPERATION.
Protective Gloves:CHEMICAL RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:SAFETY SHOWER AND EYE BATH.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Boiling Pt:B.P. Text:>100F,>38C
Vapor Density:>1
Spec Gravity:1.2
Solubility in Water:SLIGHT.
Appearance and Odor:COLORLESS LIQUID, CHARACTERISTIC ODOR.
Percent Volatiles by Volume:>99

Stability Indicator/Materials to Avoid:YES
POLYMERIZATION CATALYSTS, REDUCING AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, IGNITION SOURCES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.
Conditions to Avoid Polymerization:HEAT, POLYMERIZATION CATALYSTS,
SUNLIGHT.

Waste Disposal Methods:MIX WASTE WITH A COMBUSTIBLE CARRIER AND BURN IN
A SUITABLE EQUIPPED CHEMICAL INCINERATOR. DISPOSAL MUST COMPLY WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.